FV-520C-F涡街流量计美国OMEGA FV-520C-F涡街流量计
FV-520C-F涡街流量计
流量与液位 » 涡街流量计和皮托管 » 工业涡街流量计 » FV-500C Series
涡街流量计
FV-500C Series
Custom Built to Order - CONSULT FLOW ENGINEERING
SSP (Spectral Signal Processing) Technology
Measures Steam, Gas, and Low Viscosity Liquids
Clear Parallel Two-Line LCD Display. Displays Simultaneous Flow Rate and Total Along with Process Diagnosis
New, Compact Amplifier Housing: Lighter, Small and Easier to Handle
No Start-Up Tuning
Low Flow Stability
Advanced Self-Diagnostics
No Moving Parts
Simultaneous Analog and Pulse Outputs (Pulse requires Display)
Status Output (Flow Switch Function) or Alarm Output
Configurable Through Local Display Interface
High Accuracy: ±0.75% Rdg (Liquid), ±1% Rdg (Gas, Steam)
Learn more about the principle of vortex flow meters.
产品描述
THIS PRODUCT REQUIRES YOU TO CONSULT WITH FLOW ENGINEERING PRIOR TO ORDERING
Please be prepared to complete the "Vortex/Pitot Tube Order Questionaire" (Download in the Related Links Below) so you can fax or email it to Flow Engineering.
OMEGA’s FV-500C Series vortex flowmeter provides accurate, reliable, low-maintenance flow measurement. Vortices generated by the flowing fluid stress the shedder bar in pulses, and the shedder bar transmits the stress pulses to the encapsulated piezoelectric sensor.
Please contact Omega FLOW Engineering by phone, fax, or email flow@omega.com to size the vortex flow meter for your application. All the vortex meters are custom built to order. A display is highly recommended for any fine tuning adjustments required.
Based on the field proven sensor technology of the FV-500C Series vortex flowmeters, FV-500C features a new amplifier with proprietary spectral signal processing (SSP) technology to analyze the vortex waveform into its spectral components to filter noise from signal for the most stable measurement possible.
The FV-500C Series will provide excellent vibration immunity for stable, accurate measurements at low flows without any need for start-up tuning. The user benefits through greater reliability, reduced maintenance and a lower total cost of ownership.
The programmable display allows access to the full power of OMEGA’s new intelligent amplifier. The display is required if you would like to access the pulse output programming. The display is highly recommend if an adjustment or tweaking is required for the flow measurement application. The display also permits the user to display flow rate and/or total in engineering units for liquids and gases. Rate and total are displayed simultaneously. If the density or enthalpy of the fluid is constant (i.e. the temperature and pressure do not change), the density value can be entered into the meter to display in kilograms, pounds or metric tons; the enthalpy value can be entered to display in BTUs, kilojoules, etc. Analog output span adjustment and low cutoff are also settable from the display, there is no need to adjust pots. The analog and pulse outputs can also be forced to output from 0 to 100% FS or 0 to 6000 Hz without any flow through the meter as a test of the amplifier. For steam flow measurement, the FV-500C can be used with the OMEGA® FC-20 mass flow computer. The standard FV-500C is wafer-style to slip between 150# ANSI flanges, and comes supplied with extra long bolts for installation. Units with the suffix “-F” have 150# ANSI flanges, 300 lb flange mount is available.
Model No.
(Without Display Module) Description Lay Length
(mm/inches) Weight
(kg/lbs)
FV-505C 1/2" wafer mount 70 (2.8) 2.8 (6)
FV-505C-F 1/2" flange mount 70 (2.8) 2.8 (6)
FV-510C 1" wafer mount 70 (2.8) 3.7 (8)
FV-510C-F 1" flange mount 70 (2.8) 3.7 (8)
FV-515C 1 1/2" wafer mount 70 (2.8) 4.3 (9.5)
FV-515C-F 1 1/2" flange mount 70 (2.8) 4.3 (9.5)
FV-520C 2" wafer mount 75 (3.0) 6 (14)
FV-520C-F 2" flange mount 75 (3.0) 6 (14)
FV-530C 3" wafer mount 100 (3.9) 9.4 (21)
FV-530C-F 3" flange mount 100 (3.9) 9.4 (21)
FV-540C 4" wafer mount 120 (4.7) 12.8 (28)
FV-540C-F 4" flange mount 120 (4.7) 12.8 (28)
FV-560C-F 6" flange mount 270 (10.6) 36.4 (80)
FV-580C-F 8" flange mount 310 (12.2) 55.4 (122)
FV-591C-F 10" flange mount 370 (14.6) 90 (199)
FV-592C-F 12" flange mount 400 (15.7) 140 (308)
Note: Units with “ -F” suffix have 150 class flange connections, 300 lb flange mount is available if needed.
For units with a display, add “-D” to the part number and $403 to the price.
For units with remote electronics, add “-R” to the part number, subtract $455 from the price, and order the mounting kit and cable below.
For units designed for high temperature use, add “-HT” to the model number and consult engineering for prices.
THIS PRODUCT REQUIRES YOU TO CONSULT WITH FLOW ENGINEERING PRIOR TO ORDERING
Please be prepared to complete the "Vortex/Pitot Tube Order Questionaire" (Download in the Related Links Below) so you can fax or email it to Flow Engineering.
注: Comes with complete operators manual.
产品编号 产品描述
NOTE: PLEASE CONSULT WITH FLOW ENGINEERING BEFORE ORDERING. Application Configuration Data Required!
FV-505C 1/2" wafer mount vortex flowmeter
FV-505C-D 1/2" wafer mount vortex flowmeter with a display
FV-505C-F 1/2" 150# flange mount vortex flowmeter
FV-505C-F-D 1/2" 150# flange mount vortex flowmeter with a display
FV-510C 1" wafer mount vortex meter
FV-510C-D 1" wafer mount vortex flowmeter with a display
FV-510C-F 1" 150# flange mount vortex flowmeter
FV-510C-F-D 1" 150# flange mount vortex flowmeter with a display
FV-515C 1 1/2" wafer mount vortex flowmeter
FV-515C-D 1 1/2" wafer mount vortex flowmeter with a display
FV-515C-F 1 1/2" 150# flange mount vortex flowmeter
FV-515C-F-D 1 1/2" 150# flange mount vortex flowmeter with a display
FV-520C 2" wafer mount vortex flowmeter
FV-520C-D 2" wafer mount vortex flowmeter with a display
FV-520C-F 2" 150# flange mount vortex flowmeter
FV-520C-F-D 2" 150# flange mount vortex flowmeter with a display
FV-530C 3" wafer mount style vortex flowmeter
FV-530C-D 3" wafer mount style vortex flowmeter with a display
FV-530C-F 3" 150# flange mount vortex flowmeter
FV-530C-F-D 3" 150# flange mount vortex flowmeter with a display
FV-530C-F-D-R 3" 150# flange mount vortex flowmeter with a display and remote electronics.
**Units with remote display require a mounting kit and cable from the Accessories list below.
FV-540C 4" wafer mount vortex flowmeter
FV-540C-D 4" wafer mount vortex flowmeter with display
FV-540C-F 4" 150# flange mount vortex flowmeter
FV-540C-F-D 4" 150# flange mount vortex flowmeter with a display
FV-560C-F 6" 150# flange mount vortex flowmeter
FV-560C-F-D 6" 150# flange mount vortex flowmeter with a display
FV-580C-F 8" 150# flange mount vortex flowmeter
FV-580C-F-D 8" 150# flange mount vortex flowmeter with a display
FV-591C-F 10" 150# flange mount vortex flowmeter
FV-591C-F-D 10" 150# flange mount vortex flowmeter with a display
FV-592C-F 12" 150# flange mount vortex flowmeter
FV-592C-F-D 2" 150# flange mount vortex flowmeter with a display
Accessories
FV-500C-DISPLAY Integral Display Kit
FV-500CABLE-10F 10' cable for remote mounting
FV-500CABLE-30F 30' cable for remote mounting
FV-500CABLE-50F 50' cable for remote mounting
FV-500CABLE-100F 100' cable for remote mounting
FV-520C-F涡街流量计
产品型号
FV-505C
FV-505C-D
FV-505C-F
FV-505C-F-D
FV-510C
FV-510C-D
FV-510C-F
FV-510C-F-D
FV-515C
FV-515C-D
FV-515C-F
FV-515C-F-D
FV-520C
FV-520C-D
FV-520C-F
FV-520C-F-D
FV-530C
FV-530C-D
FV-530C-F
FV-530C-F-D
FV-540C
FV-540C-D
FV-540C-F
FV-540C-F-D
FV-560C-F
FV-560C-F-D
FV-580C-F
FV-580C-F-D
FV-591C-F
FV-591C-F-D
FV-592C-F
FV-592C-F-D
FV-500 CABLE- 30F
FV-500B-RMK
FV-500B-TBL
FV-500CABLE-100F
FV-500CABLE-10F
FV-500CABLE-30F
FV-500CABLE-50F
FV-500CABLE-70F
FV-520C-F涡街流量计
FV-520C-F涡街流量计美国OMEGA FV-520C-F涡街流量计衍生阅读
FV-520C-F涡街流量计美国OMEGA FV-520C-F涡街流量计相关产品
