FMA-LP2617A-I流量传感器 美国OMEGA FMA-LP2617A-I流量传感器
FMA-LP2617A-I
流量与液位 » 电子质量流量计 » 经济的质量流量计和控制器 » FMA-LP2600A
Low Pressure Drop Gas Mass Flow Controllers For Clean Gases
FMA-LP2600A
130+ Gas Calibrations Including Pure and Mixed Gases
Pressure, Temperature, and Mass Flow Simultaneously Displayed
Easy-to-Use Pushbutton Interface
NIST Traceability Standard
Full Scale Ranges from 0.5 SCCM to 500 SLM
Response Time of 50 to 100 ms Typical
Turndown Ratio of 200:1
Position Insensitive
±0.8% Reading Accuracy
RS232 Standard
Custom Live Gas Blend Programming
Store Up to 20 User Defined Gas Blends
产品描述
The FMA-LP2600A Series mass flow controllers use the principle of differential pressure within a laminar flow field to determine and control mass flow rate. A laminar flow element (LFE) inside the meter forces the gas into laminar (streamlined) flow. Inside this region, the Poiseuille equation dictates that the volumetric flow rate be linearly related to the pressure drop. A differential pressure sensor is used to measure the pressure drop along a fixed distance of the LFE. This, along with the viscosity of the gas, is used to accurately determine the volumetric flow rate. Separate absolute temperature and pressure sensors are incorporated and correct the volumetric flow rate to a set of standard conditions. This standardized flow rate is commonly called the mass flow rate and is reported in units such as standard cubic centimeters per minute (SCCM) or standard liters per minute (SLM).
The controller uses a true proportional valve coupled to the flow body to control flow using the integral PID loop controller. Standard units include a 0 to 5V output (4 to 20 mA optional) and RS232 communications. The gas-select feature and the setpoints can be adjusted from the front keypad or via RS232 communications. Volumetric flow, mass flow, absolute pressure, and temperature can all be viewed or recorded through the RS232 connection. It is also possible to multi-drop up to 26 units on the same serial connection to a distance of 46 m (150').
Specifications
Accuracy: ±(0.8% of reading + 0.2% FS)
Repeatability: ±0.2% FS
Turndown Ratio: 200:1
Control Response Time: 100 ms
Input Control Signal: 0 to 5 Vdc, RS232
Output Signal: 0 to 5 Vdc, RS232
Optional Input/Outputs: 4 to 20 mA, 0 to 10 Vdc
Operating Temperature: -10 to 50°C (14 to 122°F)
Zero Shift: 0.02%/ATM FS/°C
Span Shift: 0.02%/ATM FS/°C
Humidity Range: 0 to 100% RH, non-condensing
Excess Flow Rate: 2.4% FS
Wetted Materials: 303 and 302 SS, FKM, silicone RTV (rubber), glass-reinforced nylon, aluminum, brass, 410 SS, silicone, glass; >250 SLM: 416 SS and nickel replace brass
Maximum Pressure: 50 psig
To Use in Volumetric Mode: Near atmosphere, 15 psig recommended maximum. Volumetric flow meters and controllers not certified for accuracy at mass flow rates above the rated flow range of the meter. They are designed for near atmospheric pressure conditions only. The recommended maximum operating pressure is 15 psig
Supply Current: 0.250 A for 20 SLM and under; 0.75 A for 50 SLM and above (typical)
Supply Voltage: 15 to 30 Vdc for units 2 SLM and smaller; 24 to 30 Vdc for units 5 SLM and larger
Electrical Connections: 8-pin circular mini DIN
注: Comes complete with 24 Vdc universal power supply, 1.8 m (6') cable, 8-pin male Mini- DIN connector, operator's manual, and NIST certificate.
产品编号 产品描述
Mass Flow Controllers
FMA-LP2601A 0.5 SCCM, 10 to 32 UNF Thread
FMA-LP2601A-I 0.5 SCCM, 10 to 32 UNF Thread, one 4 to 20 mA output
FMA-LP2601A-I2 0.5 SCCM, 10 to 32 UNF Thread, two 4 to 20 mA output
FMA-LP2601A-V2 0.5 SCCM, 10 to 32 UNF Thread, two 0 to 5V output
FMA-LP2602A 1 SCCM, 10 to 32 UNF Thread
FMA-LP2602A-I 1 SCCM, 10 to 32 UNF Thread, one 4 to 20 mA output
FMA-LP2602A-I2 1 SCCM, 10 to 32 UNF Thread, two 4 to 20 mA output
FMA-LP2602A-V2 1 SCCM, 10 to 32 UNF Thread, two 0 to 5 V output
FMA-LP2614A 2 SCCM, 10 to 32 UNF Thread
FMA-LP2614A-I 2 SCCM, 10 to 32 UNF Thread, one 4 to 20 mA output
FMA-LP2614A-I2 2 SCCM, 10 to 32 UNF Thread, two 4 to 20 mA output
FMA-LP2614A-V2 2 SCCM, 10 to 32 UNF Thread, two 0 to 5 V output
FMA-LP2615A 5 SCCM, 10 to 32 UNF Thread
FMA-LP2615A-I 5 SCCM, 10 to 32 UNF Thread, one 4 to 20 mA output
FMA-LP2615A-I2 5 SCCM, 10 to 32 UNF Thread, two 4 to 20 mA output
FMA-LP2615A-V2 5 SCCM, 10 to 32 UNF Thread, two 0 to 5 V output
FMA-LP2603A 10 SCCM, 10 to 32 UNF Thread
FMA-LP2603A-I 10 SCCM, 10 to 32 UNF Thread, one 4 to 20 mA output
FMA-LP2603A-I2 10 SCCM, 10 to 32 UNF Thread, two 4 to 20 mA output
FMA-LP2603A-V2 10 SCCM, 10 to 32 UNF Thread, two 0 to 5V output
FMA-LP2616A 20 SCCM, 10 to 32 UNF Thread
FMA-LP2616A-I 20 SCCM, 10 to 32 UNF Thread, one 4 to 20 mA output
FMA-LP2616A-I2 20 SCCM, 10 to 32 UNF Thread, two 4 to 20 mA output
FMA-LP2616A-V2 20 SCCM, 10 to 32 UNF Thread, two 0 to 5 V output
FMA-LP2604A 50 SCCM, 1/8 FNPT
FMA-LP2604A-I 50 SCCM, 1/8 FNPT, one 4 to 20 mA output
FMA-LP2604A-I2 50 SCCM, 1/8 FNPT, two 4 to 20 mA output
FMA-LP2604A-V2 50 SCCM, 1/8 FNPT, two 0 to 5V output
FMA-LP2617A 100 SCCM, 1/8 FNPT connection
FMA-LP2617A-I 100 SCCM, 1/8 FNPT, one 4 to 20 mA output
FMA-LP2617A-I2 100 SCCM, 1/8 FNPT, two 4 to 20 mA output
FMA-LP2617A-V2 100 SCCM, 1/8 FNPT, two 0 to 5 V output
FMA-LP2618A 200 SCCM, 1/8 FNPT connection
FMA-LP2618A-I 200 SCCM, 1/8 FNPT, one 4 to 20 mA output
FMA-LP2618A-I2 200 SCCM, 1/8 FNPT, two 4 to 20 mA output
FMA-LP2618A-V2 200 SCCM, 1/8 FNPT, two 0 to 5 V output
FMA-LP2619A 500 SCCM, 1/8 FNPT connection
FMA-LP2619A-I 500 SCCM, 1/8 FNPT, one 4 to 20 mA output
FMA-LP2619A-I2 500 SCCM, 1/8 FNPT, two 4 to 20 mA output
FMA-LP2619A-V2 500 SCCM, 1/8 FNPT, two 0 to 5 V output
FMA-LP2620A 1 SLM, 1/8 FNPT
FMA-LP2620A-I 1 SLM, 1/8 FNPT, one 4 to 20 mA output
FMA-LP2620A-I2 1 SLM, 1/8 FNPT, two 4 to 20 mA output
FMA-LP2620A-V2 1 SLM, 1/8 FNPT, two 0 to 5 V output
FMA-LP2605A 2 SLM, 1/8 FNPT
FMA-LP2605A-I 2 SLM, 1/8 FNPT, one 4 to 20 mA output
FMA-LP2605A-I2 2 SLM, 1/8 FNPT, two 4 to 20 mA output
FMA-LP2605A-V2 2 SLM, 1/8 FNPT, two 0 to 5 V output
FMA-LP2606A 5 SLM, 1/4 FNPT
FMA-LP2606A-I 5 SLM, 1/4 FNPT, one 4 to 20 mA output
FMA-LP2606A-I2 5 SLM, 1/4 FNPT, two 4 to 20 mA output
FMA-LP2607A 10 SLM, 1/4 FNPT
FMA-LP2607A-I 10 SLM, 1/4 FNPT, one 4 to 20 mA output
FMA-LP2607A-I2 10 SLM, 1/4 FNPT, two 4 to 20 mA output
FMA-LP2607A-V2 10 SLM, 1/4 FNPT, two 0 to 5 V output
FMA-LP2608A 20 SLM, 1/4 FNPT
FMA-LP2608A-I 20 SLM, 1/4 FNPT, one 4 to 20 mA output
FMA-LP2608A-I2 20 SLM, 1/4 FNPT, two 4 to 20 mA output
FMA-LP2608A-V2 20 SLM, 1/4 FNPT, two 0 to 5 V output
FMA-LP2609A 50 SLM, 3/4 FNPT
FMA-LP2609A-I 50 SLM, 3/4 FNPT, one 4 to 20 mA output
FMA-LP2609A-I2 50 SLM, 3/4 FNPT, two 4 to 20 mA output
FMA-LP2609A-V2 50 SLM, 3/4 FNPT, two 0 to 5 V output
FMA-LP2610A 100 SLM, 3/4 FNPT
FMA-LP2610A-I 100 SLM, 3/4 FNPT, one 4 to 20 mA output
FMA-LP2610A-I2 100 SLM, 3/4 FNPT, two 4 to 20 mA output
FMA-LP2610A-V2 100 SLM, 3/4 FNPT, two 0 to 5 V output
FMA-LP2611A 250 SLM, 3/4 FNPT
FMA-LP2611A-I 250 SLM, 3/4 FNPT, one 4 to 20 mA output
FMA-LP2611A-I2 250 SLM, 3/4 FNPT, two 4 to 20 mA output
FMA-LP2611A-V2 250 SLM, 3/4 FNPT, two 0 to 5 V output
FMA-LP2612A 500 SLM, 3/4 FNPT
FMA-LP2612A-I 500 SLM, 3/4 FNPT, one 4 to 20 mA output
FMA-LP2612A-I2 500 SLM, 3/4 FNPT, two 4 to 20 mA output
FMA-LP2612A-V2 500 SLM, 3/4 FNPT, two 0 to 5 V output
Accessories
FMA1600-C1 Replacement 1.8M (6') 8 pin male Mini-DIN single ended, cable connector
FMA1600-C1-25 FT 7.62M (25') 8 pin male Mini-DIN single ended, cable connector
FMA1600-C2 1.8M (6') 8 pin male Mini-DIN double ended, cable connector
FMA1600-C2-25 FT 7.62M (25') 8 pin male Mini-DIN double ended, cable connector
FMA1600-C3 1.8M (6') 8 pin male Mini-DIN to DB9 female adapter
FMA1600-CRA 1.8M (6') 8 pin male right angle Mini-DIN single ended cable connector
FMA1600-MDB Multi Drop Box
FMA1600-PSU 24 Vdc universal power supply
FMA1600-E2 220VAC to 24VDC Power Supply for 50 LPM or greater
Tube Fitting Adapters for Threaded to 10/32
FTNY-K210BN Nylon Body, TUBE ID 1/16" TO MALE 10-32UNF
FTPP-K210NP Polypropylene Body, TUBE ID 1/16" TO MALE 10-32UNF
FTNY-K230BN Nylon Body, TUBE ID 1/8" TO MALE 10-32UNF
FTPP-K230NP Polypropylene Body, TUBE ID 1/8" TO MALE 10-32UNF
FMA-LP2601A
FMA-LP2601A-I
FMA-LP2601A-I2
FMA-LP2601A-V2
FMA-LP2602A
FMA-LP2602A-I
FMA-LP2602A-I2
FMA-LP2602A-V2
FMA-LP2603A
FMA-LP2603A-I
FMA-LP2603A-I2
FMA-LP2603A-V2
FMA-LP2604A
FMA-LP2604A-I
FMA-LP2604A-I2
FMA-LP2604A-V2
FMA-LP2605A
FMA-LP2605A-I
FMA-LP2605A-I2
FMA-LP2605A-I2P-IN
FMA-LP2605A-V2
FMA-LP2606A
FMA-LP2606A-I
FMA-LP2606A-I2
FMA-LP2606A-V2
FMA-LP2607A
FMA-LP2607A-I
FMA-LP2607A-I2
FMA-LP2607A-IP2-IN-H2
FMA-LP2607A-V2
FMA-LP2608A
FMA-LP2608A-I
FMA-LP2608A-I2
FMA-LP2608A-V2
FMA-LP2609A
FMA-LP2609A-I
FMA-LP2609A-I2
FMA-LP2609A-V2
FMA-LP2610A
FMA-LP2610A-I
FMA-LP2610A-I2
FMA-LP2610A-V2
FMA-LP2611A
FMA-LP2611A-I
FMA-LP2611A-I2
FMA-LP2611A-V2
FMA-LP2612A
FMA-LP2612A-I
FMA-LP2612A-I2
FMA-LP2612A-V2
FMA-LP2614A
FMA-LP2614A-I
FMA-LP2614A-I2
FMA-LP2614A-V2
FMA-LP2615A
FMA-LP2615A-I
FMA-LP2615A-I2
FMA-LP2615A-V2
FMA-LP2616A
FMA-LP2616A-I
FMA-LP2616A-I2
FMA-LP2616A-V2
FMA-LP2617A
FMA-LP2617A-I
FMA-LP2617A-I2
FMA-LP2617A-V2
FMA-LP2618A
FMA-LP2618A-I
FMA-LP2618A-I2
FMA-LP2618A-V2
FMA-LP2619A
FMA-LP2619A-I
FMA-LP2619A-I2
FMA-LP2619A-V2
FMA-LP2620A
FMA-LP2620A-I
FMA-LP2620A-I2
FMA-LP2620A-V2
FMA-LP2617A-I
FMA-LP2617A-I流量传感器 美国OMEGA FMA-LP2617A-I流量传感器衍生阅读
FMA-LP2617A-I流量传感器 美国OMEGA FMA-LP2617A-I流量传感器相关产品
