LVCN403工业流量计LVCN403 美国Omega
LVCN403
流量与液位 » 仪器和配件 » 指示器，累加器，批量控制器和信号调节器 » LVCN-40
LEVEL INDICATOR AND INTERFACE
LVCN-40
Indicates Tank Level or Volume and Relay Status
Enables Relay Set Point Changes in the Field
Powered Directly by the Attached Sensors
Repeats Sensor Data with No Programming
Corrosion Resistant Enclosure with Nema 4 (IP65) Faceplate
产品描述
The LVCN-40 indicator displays tank level or volume in engineering units with 1 to 4 relay status indicators, and is compatible with LVCN210, LVCN318 or LVCN414 series level sensor that’s been configured with the provided software (V50 firmware or higher). Powered by the sensor, the field mount indicator may be located up to 4.5 m (15') from the sensor. The LVCN-40 requires no programming. The indicator repeats the measured value, displays relay status and set-point configuration of the attached sensor. If relay set-point changes are desired, they can be easily made through the field indicator.
Specifications
Display
Type: LCD, 6-digit with 4 relay indicators
Units: Engineering
Output: -99999 to 999999
Character Height: 9.5 mm (0.374")
Decimal Point: Fixed
Dot Indication: Relay status
User Interface: Three button
Sensor Input (1): LVCN210, LVCN318 or LVCN414 series
Supply Voltage: Provided by sensor
Operating Temperature: -20 to 60°C (-4 to 140°F)
Cable
Type: 4-conductor, #22 AWG
Length: 1.8 m (6')
Jack Material: Polyurethane
Enclosure
Rating: Nema 4 (IP65) faceplate
Material: Polycarbonate
Type: Panel mount
Button Material: Silicon rubber
Classification: General purpose
产品编号 产品描述
LVCN-40 Level display and interface for LVCN210, LVCN318 and LVCN414 series
sss产品编号 产品描述
LVCN-40
LVCN-40
LVCN401
LVCN402
LVCN403
LVCN403
LVCN403工业流量计LVCN403 美国Omega衍生阅读
LVCN403工业流量计LVCN403 美国Omega相关产品
