FPD3103-D进口流量计FPD3103-D
FPD3103-D
流量与液位 » 涡轮和叶轮流量计 » 用于高粘度流体的容积式流量计 » FPD3100
Positive Displacement FlowMeter for Corrosive Liquids
FPD3100
PPS Body
Temperatures up to 80ºC (176ºF)
NPT or BSP Threads
产品描述
The FPD3100 Series positive displacement flowmeters are affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. The meter’s solid construction and excellent dynamic response are well suited to the measurement of many corrosives as well as other non-abrasive fluids. Since there is no need for straight run piping upstream or downstream of the flowmeter, the FPD3100 flowmeters are simple to use and to install. The meter has good resolution and high accuracy at low flow rates.
Specifications
Accuracy: ±0.5% of reading
Repeatability: ±0.03%
Fitting Type:
NPT: Female
BSP: “-BSP” option
Hall-Effect Sensor Power: 4.5 to 24 Vdc (7.5 mA)
Reed Sensor Power: 30 Vdc (500 mA)
Output Options:
Pulse Output: Standard NPN
4 to 20 mA Transmitter: “-D-A” option; no output on battery powered “-D” model
Display: 7-digit/12 mm (0.47") upper, 7-digit/7 mm (0.28") lower all “-D” options
Rate: User defined
Total: Resettable
Accumulated-Total: Non-resettable FPD3105
Minimum Viscosity: 1cPs
Maximum Viscosity: 1000 cPs standard
Maximum Pressure: See chart on next page
Strainer Size: See ordering chart on next page
Mounting: Shafts must be in a horizontal plane
Electrical Connections: 2 x 12 mm (0.08 x 0.47"), fittings included “-D-A” option
Cable Length: 1 m (3') stripped ends, non-display models
Mounting: Pipe
Power: 4 to 20 mA, “-D-A” models 18 to 30 Vdc display, “-D” models 3 Vdc lithium battery (included)
Liquid Temperature: -40 to 80°C (-40 to 176°F), -20 to 60°C (-4 to 140°F) for display models
Materials
Body and Rotors: PPS
Seals: FKM, FEP (FPD3105)
Fasteners: Stainless steel
Cable Insulation: PVC
Shaft: Hastelloy C
Enclosure: NEMA 6 (IP67)
注: Comes complete with lithium battery (-D) and operator’s manual. For units with a battery powered digital display add “-D” to the model number, for an additional charge. For units with a DC powered digital display and 4 to 20 mA output add “-D-A” to the model number, for an additional charge.
产品编号 产品描述
FPD3102 Port Size 1⁄4", Flow Range: <5 cPs, 2 to 100 LPH (0.5 to 26 GPH), >5 cPs 0.5 to 100 LPH (0.13 to 26 GPH), Maximum Pressure psi (Kpa)75 (500)
FPD3103 Port Size 1⁄4", Flow Range: <5 cPs 25 to 500 LPH (6.6 to 132 GPH), >5 cPs 15 to 500 LPH (4 to 132 GPH), Maximum Pressure psi (Kpa) 75 (500)
FPD3105 Port Size 1⁄2", Flow Range: <5 cPs, 3 to 25 LPM (0.8 to 6.6 GPM), >5 cPs2 to 30 LPM (0.5 to 8 GPM), Maximum Pressure psi (Kpa) 150 (1000)
FPD3102
FPD3102-D
FPD3102-D-A
FPD3102-PULSER KIT
FPD3103
FPD3103-D
FPD3103-D-A
FPD3105
FPD3105-D
FPD3105-D-A
FPD3103-D
FPD3103-D进口流量计FPD3103-D衍生阅读
FPD3103-D进口流量计FPD3103-D相关产品
