DP88美国OMEGA DP88厂价供应
DP88
5位精度应变指标与励磁电源
DP87
1年保修 OmegaCare
DP87:5-Digit Precision Strain Gage Indicators with Excitation Supply
DP87
高精度0.01%全尺寸
**的数字缩放通过前面板的按键
双工程单位有3个字符的字母数字标签的测量
插件选项包括报警，数学，模拟输出，RS-232C / 20mA，直流电源
到1μV /计数的敏感性
锁定开关防止未授权的篡改
电源线
The OMEGA DP80 Series digital strain gage indicators demonstrate impressive performance for wide compatibility with lower output, bonded foil type transducers, as well as higher output semiconductor type transducers. One of four input ranges are selectable within each instrument to optimize the sensitivity. The front panel membrane keypad facilitates accurate digital scaling, eliminating any dip switches, pot adjustments or reference standards. Three alphanumeric LEDs are included for engineering unit labels (e.g. psi, KG, LBS) or can be assigned as "0" for active display of dead zeros. An additional feature of the DP80 is the inclusion of a primary and secondary engineering units display, both of which easily be selected at the front panel. The secondary display can be any mathematical equivalent to the primary display. System calibration can be accomplished using 3-point live load (actual weight on scale) or by entering the appropriate transducer sensitivity (mV/V).
SPECIFICATIONS
Excitation Supplies: DP87: 5 Vdc @ 30 mA, 10 Vdc @ 60 mA and 15 Vdc @ 90 mA DP88/DP89:5 Vdc @ 120 mA, 10 Vdc @ 240 mA and 15 Vdc @ 350 mA
Accuracy: 0.01% of full scale range, ±1 digit
Repeatability: ±1 digit
Zero Offset: Entire input range
Zero Stability: 0.5 μV/°C no measurable drift with time
Span Stability: 0.005% of reading/°C; 0.1% of reading per year
Normal Mode Noise Rejection: > 60 dB @ 50/60 Hz
Common Mode Noise Rejection: > 120 dB @ 50/60 Hz
Input Impedance: > 10 MOhms to 500 MOhms depending on range
Display: 8-digit, 14-segment alphanumeric LED’s, 14 mm (0.54") high, and one negative (-) LED at left of LED array
Display Count Rate: ±100,000 active
Reading Rate: 2 readings per second
Overload Protection: 270 Vdc or ac RMS across inputs and input to ground. Power lead to ground 1500 Vdc or ac RMS
Ambient Operating Conditions: 0 to 50°C (32 to 122°F); 0 to 90% RH non-condensing
Storage Temperature: -40 to 65°C (-40 to 149°F)
Input Connections: ac power quick connect; dc power and sensors screw terminals; RS-232C DB25 connector
Case Construction: metal, black anodized, extruded aluminum
Power: 90 to 132 Vac; 48 to 400 Hz
Weight: DP87 1.8 kg (4 lb), DP88/DP89 2.7 kg (6 lb) (without options)
Dimensions, DP87: 67 H x 136 W x 250 mm D (2.6 x 5.3 x 9.75")
Cutout: 68 H x 138 mm W (2.7 x 5.4")
Dimensions, DP88/DP89: 67 H x 272 W x 250 mm D (2.6 x 10.6 x 9.75")
Cutout:68 H x 274 mm W (2.7 x 10.7") .
产品型号 产品描述
DP87 Single width panel mount strain gage indicator
DP88 Double width panel mount strain gage indicator
DP89 Double width benchtop strain gage indicator
DP80-ALM Plug in dual alarm option with selectable hysterisis and alarm delay (DP88/DP89 will accept two DP80-ALM)
DP80-AOV Plug in 0-10 Vdc scalable analog output board (n/a with DP80-AOC)
DP80-AOC Plug in 4-20 mA scalable analog output board (n/a with DP80-AOV)
DP80-MTH Plug in math option board with min, max, average and rate of change functions
DP80-SER Plug in RS232C/20 mA serial output
DP88
DP88美国OMEGA DP88厂价供应相关产品
