MFR012湿度控制器
MFR012湿度控制器
恒湿器/湿度调节器湿度控制
MFR012
CE
恒湿器/湿度调节器湿度控制
相对湿度可调范围
高交换容量
DIN导轨安装
该mfr012是设计用来控制空气相对湿度外壳内部。当连接到外壳的加热器，（de加湿器），它将把加热器在设定的湿度水平以提高露点。
这有助于防止损伤和冷凝腐蚀引起的电子元件故障。该mfr012也可以用来控制冷却风扇，警示灯或其他设备.
规格：
Adjustment Range: 35 to 95% (±3.0%) relative humidity Switching Difference (Hysteresis): Approx. 4% RH @ 50% relative humidity
Permissible Air Velocity: 50 ft/sec (15 m/s)
Maximum Switching Voltage: 250 Vac
Attention: 250 V should only be switched in a non-condensing environment
Contact Type: Change-over contact
Contact Resistance: <10 mΩ
Service Life: 100,000 cycles
Minimum Switching Capacity: 100 mA @ AC/DC 20 V
Maximum Switching Capacity: 5A @ AC 230V (resistive load), 1.0A @ AC 230V (inductive load at cos j = 0.8); DC 20W
EMI/EMC Compliance: EN 55014-1-2, EN 61000-3-2, EN 61000-3-3
Connection: 3-pole terminal, 3 x AWG 14 max [2.5 mm2 (0.1 in2)]
Mounting: Clip for 35mm (1.4") DIN rail (EN 50022)
Dimensions: 67H x 50W x 38 mmD (2.64 x 1.97 x 1.5")
Housing: Clip for 35mm DIN rail (EN 50022)
Weight: 60g (2oz)
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -20 to 80°C (-4 to 176°F)
Protection Type: NEMA 2 (IP20)
Application Examples:
Electrical and Electronic Enclosures
Telecommunication Systems
Display Panels
Ticket Dispensers
Automatic Teller Machines (ATM’s)
Access and Parking Control Systems
Note: The critical relative humidity for most components is 65%. Above 65% RH, condensation can cause malfunction of electronic equipment. Long-term, this can lead to corrosion and permanent damage of electronic components and systems.
注释: Comes with complete operator’s manual.
产品型号/产品描述
MFR0122 Mechanical humidity control, SPDT, 35 to 100% RH, 20 Vdc to 230 Vac
MFR012湿度控制器
MFR012湿度控制器 相关产品
