OT-201-32高温胶 美国omega
OMEGATHERM? High Temperature and High Thermally Conductive Paste
OT-201-1/2, OT-201-2, OT-201-16, OT-201-32
Thermally Conductive Paste
OT-201-1/2
PLACE ORDER
Continuous Temperature to 200°C (392°F)
Extremely High Thermal Conductivity
Adheres to Most Surfaces
View related products - Accessories
OMEGATHERM? thermal conducting paste is a high temperature and high thermally conductive paste product. They are specially formulated for permanent and temporary bonding of thermocouples, thin film RTDs, thermistors and other temperature sensors, to most surfaces–metals, ceramics, glass, plastics, paper products.
OMEGATHERM? products is compounded and packaged for convenient, easy mixing and application. Each formulation exhibits important characteristics necessary for accurate, fast, reliable temperature measurement. These are: good adhesion and strength, high temperature rating, high thermal conduction, high electric insulation, thixotropic consistency, fast cure, and easy application.
OMEGATHERM? 201
OMEGATHERM? 201 — is a very high thermally conductive filled silicone paste, ideally suited for many temperature measurement applications. This thick, grey, smooth paste wets most surfaces and will not harden on long exposure to elevated temperatures. It is rated for continuous use between -40 and 200°C (–40 and 392°F).
OMEGATHERM? 201 provides an excellent means of conducting heat and expanding the heat-path area from a surface to a temperature measurement sensor, thus increasing the speed of response and improving accuracy. Some applications are:
a) Surface Measurement Probes — dab a small amount on the surface and push the sensor into this area.
b) Temporary bonding and encapsulating of temperature sensors — simply dab OMEGATHERM? 201 onto the surface or in the cavity, plant the sensor in the paste, and tape to hold in place.
This highly versatile paste is supplied in 1/2- and 2-ounce jars, as well as in one- and two-pound containers.
| Model No. |
OT-201 |
| Material |
Silicone
Grease |
Continuous
Temperature |
200°C
(392°F) |
| Cure |
Not
required |
Adheres to
Most* |
Wets most
Surfaces |
Thermal conductivity
(k)(BTU)in)/(hr)(ft 2) (°F) |
Extremely High
16 |
Electrical Insulation
Volume Resistivity
ohm–cm |
Very High
1014 |
产品型号 产品说明
OT-201-1/2 HIGH TEMP & CONDUCTIVE PASTE, one 1/2 oz. Jar
OT-201-2 HIGH TEMP & CONDUCTIVE PASTE, one 2 oz. Jar
OT-201-16 HIGH TEMP & CONDUCTIVE PASTE, 1 lb. Can
OT-201-32 HIGH TEMP & CONDUCTIVE PASTE, Two 1 lb. Cans
OT-201-32高温胶 美国omega
