DMD4008进口变送器DMD4008
DMD4008
位移传感器 ? 线性电位器 ? DMD4008 Series
Potentiometer Input to DC Transmitters
DMD4008 Series
For use with Linear Potentiometers or Rotary Potentiometers
Voltage, Bidirectional Voltage or Current Outputs
Quick Field Setup for Hundreds of I/O Ranges
External Switches and Table for Range Selection
Removable Plugs for Fast Installation
Full 1200V Input/Output Power Isolation
Input and Output Tracking LEDs
Functional Output Test Button
Selectable Sink/Source for Current Output
Standard DIN Rail Mounting for Automation Systems
产品描述
OMEGA's DMD4008 accepts a resistance input from potentiometer, slidewire, linear position, displacement, or rotational devices and provides an optically isolated DC voltage or current output that is linearly related to the potentiometer position. It will accept any potentiometer with a value of 0 to 100 ohms through 0 to 1 Megohms without recalibration and without affecting accuracy. The DMD4008 output can be field configured via external rotary and slide switches, Offsets and/or input ranges other than 0 to 100% of the potentiometer range can also be selected.
Specifications
Potentiometer Input Ranges: Field selectable ranges via switch settings 3 wire connection required
Minimum: 0 to 100 Ω
Maximum: 0 to 1 Megohms
Input Span: 10 to 100% of potentiometer range
Input Offset: 0 to 90% in 10% increments
Input Impedence: 10 Megohms minimum
Output Ranges: Field selectable ranges via switch settings
Voltage: 0-1 V to 0-10 Vdc, 10 mA maximum
Bipolar Voltage: ±5 Vdc or ±10 Vdc
Current: 0-2 mADC to 0-20 mAdc 20V compliance, 1000 Ω at 20 mA
Output Linearity: Better than ±0.1% of span
Output Zero and Span: Multi-turn potentiometers to compensate for load and lead variations, ±15% of span adjustment range typical.
Output Loop Supply Power: 20 Vdc nominal, regulated, 25 mAdc maximum, ripple, less than 10mVrms may be selectively wired for sinking or sourcing mA output
Output Test: Front button sets output to test level when pressed, potentiometer adjustable 0 to 100% of span
Response Time: 70 milliseconds typical
Common Mode Rejection: 120 dB minimum
Isolation: 1200 Vrms minimum
Full Isolation: power to input, power to output, input to output
Ambient Temperature Range and Stability: -10°C to 60 operating ambient; better than ±0.02% per °C stability
Standard Power: 60 to 265 Vac, 50/60 Hz or 85 to 300 Vdc, 2W maximum
Low Voltage Option: 9 to 30 Vdc, or 10 to 32 Vac
Housing: Mounts to standard 35 mm DIN rail, IP40 environmental rating
Connectors: Four 4-terminal removable connectors 14 AWG maximum wire size
Dimensions: 22.5 W x 117 H x 122 mm D (0.89 x 4.62 x 4.81") height includes connectors
注: Comes complete with operator’s manual.
产品编号 产品描述
DMD4008 Standard power input, potentiometer input to DC transmitters
DMD4008-DC Low power input, potentiometer input to DC transmitters
DMD4008
DMD4008进口变送器DMD4008相关产品
