PX439-150GI美国OMEGA PX439-150GI
PX439-150GI
潜水水位变送器测量5英尺，0-690英尺的水
PX437-8-9
Available with Accuracies of 0.5%, 0.25% and 0.1% of Full Scale
Designed for Complete Submersibility
Welded 316 Stainless Steel Construction
Unique Cable Seal System Insures Water-Tight Integrity
High Static Accuracy and Repeatability
100% Computer Tested, Calibrated and Serialized
Calibration Sheet Provided
Fully Temperature Compensated
Moisture Trap Included as Standard Feature
OMEGA’s PX437, PX438 and PX439 Series submersible water level transmitters are designed to meet the rigorous environments of applications including well monitoring, pump tests, lift stations, chemical tank level, ground water and surface water measurement and process control and many others. They provide repeatable, precision depth measurements under the most adverse conditions.These transducers utilize a silicon pressure cell fitted into a stainless steel housing with an integral welded 316 stainless steel barrier diaphragm. The supplied calibration sheet specifies input and output data which reflects the unit’s static accuracy and thermal characteristics. Each transducer is shipped with a moisture trap that prevents moisture from entering the vent tube. Replacement moisture traps are available as accessory items.
规格
Excitation: 9 to 30 Vdc, reverse polarity protected
Output: 4 to 20 mA dc, 2 wire, short circuit protected
Input Current: 20 mA max
Zero Offset: ±0.12 mA max
Insulation Resistance: 100 MΩ at 50Vdc
Accuracy: PX437 0.1% FS BFSL, PX438 0.25% FS BFSL, PX439 0.5% FS BFSL (includes linearity, hysteresis and repeatability)
Response Time: 2 ms
Operating Temperature: -10 to 60°C (15 to 140°F)
Compensated Temperature: 0 to 50°C (32 to 120°F)
Combined Thermal Effect: ±0.05% FS/°C (Zero and Span) 0.1% FS/°C for 2 and 5 psig ranges
Proof Pressure: 150%
Burst Pressure: 200%
Wetted Parts: 316 Stainless Steel, acetal, Polyurethane Cable FKM or PFE
Fill Fluid: Silicone oil
Mounting Provisions: Suspended by cable. For turbulent conditions, specify optional mounting clamp Electrical
Connections: Submersible cable terminating in pigtail leads
Cable: Polyurethane jacketed shielded cable with polyethylene vent tube and Kevlar? tension members 198 lb (90 kg) pull strength Conductors are 22 AWG
Weight: 200 g (7 oz) transducer 79 g/m cable (0.8 oz/ft) cable weight
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
注释: (1) To order 0.25% accuracy model specify PX438, for 0.1% accuracy specify PX437. See "Part Number Builder" below for pricing.
(2) For models with 1/4" NPT male pressure fitting add suffix "-NPT" to part number. No extra charge.
(3) For models with additional cable add $1.80 per foot of additional cable
产品型号说明
(1) (2) (3)
PX43
-
选项描述
(1) Accuracy
选择
9 代表 0.5% Full scale accuracy
8 代表 0.25% Full scale accuracy
7 代表 0.1% Full scale accuracy
(2) Pressure Range
选择
002GI 代表 0-2 psi (0-4.6 feet of water) range
005GI 代表 0-5 psi (0-11.5 feet of water) range
010GI 代表 0-10 psi (0-23.1 feet of water) range
015GI 代表 0-15 psi (0-34.6 feet of water) range
030GI 代表 0-30 psi (0-69.2 feet of water) range
050GI 代表 0-50 psi (0-115 feet of water) range
100GI 代表 0-100 psi (0-230 feet of water) range
150GI 代表 0-150 psi (0-345 feet of water) range
200GI 代表 0-200 psi (0-460 feet of water) range
250GI 代表 0-250 psi (0-575 feet of water) range
300GI 代表 0-300 psi (0-690 feet of water) range
(3) Fitting
选择
代表 No fitting
-NPT 代表 1/4-18 NPT male fitting
注意: 并非所有组合都有效，请参见规格表上有效的产品编号。
产品型号/产品描述
0.1% Accuracy Models
PX437-002GI 0-2 psi, 0.1% accuracy, submersible transmitter with 20 foot cable
PX437-005GI 0-5 psi, 0.1% accuracy, submersible transmitter with 20 foot cable
PX437-010GI 0-10 psi, 0.1% accuracy, submersible transmitter with 40 foot cable
PX437-015GI 0-15 psi, 0.1% accuracy, submersible transmitter with 50 foot cable
PX437-030GI 0-30 psi, 0.1% accuracy, submersible transmitter with 90 foot cable
0.25% Accuracy Models
PX438-005GI 0-5 psi, 0.25% accuracy, submersible transmitter with 20 foot cable
PX438-010GI 0-10 psi, 0.25% accuracy, submersible transmitter with 40 foot cable
PX438-015GI 0-15 psi, 0.25% accuracy, submersible transmitter with 50 foot cable
PX438-030GI 0-30 psi, 0.25% accuracy, submersible transmitter with 90 foot cable
0.5% Accuracy Models
PX439-002GI 0-2 psi, 0.5% accuracy, submersible transmitter with 20 foot cable
PX439-005GI 0-5 psi, 0.5% accuracy, submersible transmitter with 20 foot cable
PX439-010GI 0-10 psi, 0.5% accuracy, submersible transmitter with 40 foot cable
PX439-015GI 0-15 psi, 0.5% accuracy, submersible transmitter with 50 foot cable
PX439-030GI 0-30 psi, 0.5% accuracy, submersible transmitter with 90 foot cable
PX439-050GI 0-50 psi, 0.5% accuracy, submersible transmitter with 135 foot cable
PX439-100GI 0-100 psi, 0.5% accuracy, submersible transmitter with 250 foot cable
PX439-150GI 0-150 psi, 0.5% accuracy, submersible transmitter with 365 foot cable
PX439-200GI 0-200 psi, 0.5% accuracy, submersible transmitter with 480 foot cable
PX439-250GI 0-250 psi, 0.5% accuracy, submersible transmitter with 595 foot cable
PX439-300GI 0-300 psi, 0.5% accuracy, submersible transmitter with 710 foot cable
ACCESSORIES
PX430-TRAP Replacement water vapor trap (1 included with transmitter)
PX430-CLAMP Mounting clamp
PX439-150GI
PX439-150GI美国OMEGA PX439-150GI相关产品
